EN
导航
News
We are professional, we are confident, we do better
Current Position:
Homepage
/
News
/
Industry news
/
The anode and cathode of a lithium battery

The anode and cathode of a lithium battery

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-05-12 15:49
  • Views:

(Summary description)Lithium batteries usually come in two shapes: cylindrical and square. The inside of the cell is a spiral wound structure, separated between the positive and negative poles by a very fine and permeable polyethylene film. The positive electrode includes a current collecting electrode composed of lithium cobalt acid (or lithium nickel-cobalt manganese acid, lithium manganese acid, lithium ferrous phosphate, etc.) and aluminum foil. The negative electrode is composed of a current collector consisting of graphitized carbon material and copper foil. The cell is filled with an organic electrolyte solution. Also equipped with safety relief valves and PTC element cylindrical use (part), so that the battery in the abnormal state and the output short circuit protect cells from damage, single section of lithium battery voltage of 3.7 V (3.2 V lithium iron phosphate anode), battery capacity is not likely to infinite, therefore, will be a single section often lithium batteries in series, in parallel processing, To meet the requirements of different occasions.

The anode and cathode of a lithium battery

(Summary description)Lithium batteries usually come in two shapes: cylindrical and square. The inside of the cell is a spiral wound structure, separated between the positive and negative poles by a very fine and permeable polyethylene film. The positive electrode includes a current collecting electrode composed of lithium cobalt acid (or lithium nickel-cobalt manganese acid, lithium manganese acid, lithium ferrous phosphate, etc.) and aluminum foil. The negative electrode is composed of a current collector consisting of graphitized carbon material and copper foil. The cell is filled with an organic electrolyte solution. Also equipped with safety relief valves and PTC element cylindrical use (part), so that the battery in the abnormal state and the output short circuit protect cells from damage, single section of lithium battery voltage of 3.7 V (3.2 V lithium iron phosphate anode), battery capacity is not likely to infinite, therefore, will be a single section often lithium batteries in series, in parallel processing, To meet the requirements of different occasions.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-05-12 15:49
  • Views:
Information

Lithium batteries usually come in two shapes: cylindrical and square. The inside of the cell is a spiral wound structure, separated between the positive and negative poles by a very fine and permeable polyethylene film. The positive electrode includes a current collecting electrode composed of lithium cobalt acid (or lithium nickel-cobalt manganese acid, lithium manganese acid, lithium ferrous phosphate, etc.) and aluminum foil. The negative electrode is composed of a current collector consisting of graphitized carbon material and copper foil. The cell is filled with an organic electrolyte solution. Also equipped with safety relief valves and PTC element cylindrical use (part), so that the battery in the abnormal state and the output short circuit protect cells from damage, single section of lithium battery voltage of 3.7 V (3.2 V lithium iron phosphate anode), battery capacity is not likely to infinite, therefore, will be a single section often lithium batteries in series, in parallel processing, To meet the requirements of different occasions.

Scan the QR code to read on your phone

Previous: Why does the capacity of lithium batteries become low in winter
Next: Misunderstandings about lithium battery discharge
Previous: Why does the capacity of lithium batteries become low in winter
Next: Misunderstandings about lithium battery discharge
How is the charging and discharging process of lithium battery 2022-05-12
Negative electrode: The negative electrode material of the battery should be composed of raw materials with low relative potential of lithium electrode, with high specific volume and good crossover performance, so as to maintain the stability and reliability of mechanical equipment in the whole process of lithium intercalation.
How much lithium battery charging current is better 2022-05-12
constant current charging current: the so-called constant current is the current constant, voltage gradually increased, at this time into the fast charging stage. Most constant-current charging currents are set between 0.4 and 0.6C, which can be understood as 0.5C, which means it can be charged in about two hours without considering other factors. The reason why 0.5C is chosen is that this current achieves a good balance between charging time and charging safety.
How to store lithium batteries that are not used for a long time 2022-05-12
Thus, the higher the storage temperature and the more fully charged the battery, the greater the capacity loss. Therefore, long-term storage of lithium-ion batteries is not recommended. If users have idle batteries in their hands, the recommended storage conditions are 40% charge level and storage temperature below 15 degrees Celsius or lower.
Graphene suits lithium-ion batteries for energy storage 2022-05-12
As the country enters the sweltering heat wave, there is no shortage of news about electric cars catching fire. What causes the frequent occurrence of electric vehicle fires? In daily life, most of the common mobile phones, laptop computers, electric vehicles, etc., use energy storage lithium batteries. The explosion and misfire phenomenon of energy storage lithium batteries is collectively known as "thermal runaway". Although the technical level of energy storage lithium battery manufacturers is becoming stronger, the failure of batteries is still unavoidable.
Lithium ion batteries are widely used in various fields 2022-05-12
As we all know, the new market demand for lithium-ion batteries is forming very fast. Lithium-ion batteries currently come in three chunks. One is consumer electronics. Now people on mobile devices, smart phones, laptops, the vast majority of lithium-ion batteries have been used, this market capacity can be basically calculated as a unit of billions. The second is the rising demand for electric vehicles, whether pure electric vehicles or plug-in hybrid electric vehicles, the current demand has gradually formed. Third, lithium will be used in the field of energy storage. Its market capacity will be larger than that of electric cars, and it can even be measured in trillions of dollars of output value.
The difference between batteries and lead-acid batteries 2022-05-12
At present, the energy density of lithium battery is 200-260h/g, and the lead-acid battery is 50-70H /g. Then the weight energy density of lithium battery is 3-5 times that of lead-acid battery, which means that the lead-acid battery is 3-5 times that of lithium battery in the same capacity, so lithium battery has a greater advantage in energy storage technology.

If you recognize Fyoda's brand, technology, products and market prospects,

We look forward to establishing a strategic partnership with you for win-win cooperation and development!

Product Center

Contact Details

这是描述信息

24-hour service hotline

Tel: 13418697882 (Mr. Li)
E-mail: lcq@cell-solar.com

Address: Building 4, No. 28, Tianshan Road, Xinbei District, Changzhou

这是描述信息

WeChat

这是描述信息

Mobile Station

Copyright © 2022  Changzhou Fyoda Intelligent Equipment Technology Co., Ltd.    苏ICP备*********号-1